繁體中文
简体中文
English
|
项 目 (Item) |
数 据 (Data) |
||
|
认证(APPROVAL) |
cUL CE |
||
|
测试标准(Test standard) |
IEC/EN61984：2009 / UL1059 |
||
|
产品间距(Pitch)[mm] |
5.0/5.08 |
||
|
极数(Poles) |
2-24P |
||
|
EN61984测试数据（EN61984 Test data) |
/ |
||
|
额定电压(Rated voltage)[V] |
320 |
||
|
额定电流(Rated current)[A] |
20 |
||
|
额定连接容量(Rated connection capacity)(solid/stranded) [mm²] |
2.5 |
||
|
过压类别/污染等级/绝缘材料组别 (Surge voltage category/pollution degree/material group) |
Ⅲ/2/I |
||
|
额定冲击电压(Rated impulse voltage)[KV] |
2.5 |
||
|
额定扭矩(Rated torque)[N·m] |
0.4 |
||
|
UL1059测试数据（UL1059Test data) |
UL File Number E228872 |
||
|
应用组别(Use group) |
B |
C |
D |
|
额定电压(Rated voltage)[V] |
300 |
/ |
300 |
|
额定电流(Rated current)[A] |
15 |
/ |
10 |
|
额定连接容量(Rated connection capacity) (solid/stranded) [AWG] |
28-12 |
||
|
额定扭矩（Rated torque）[Lb. in] |
3.54 |
||
|
通用数据(General data) |
/ |
||
|
螺丝(Screw) |
M2.5 |
||
|
阻燃等级(Inflammability class)UL94 |
V-0 |
||
|
环境温度(Ambient temperature)[℃] |
-40~+105 |
||
|
相对湿度(Relative humidity) |
5%-95% |
||
|
抽样检验标准(Inspection standard） |
MIL-STD-105E II |
||
|
允收水准(AQL) |
0.65 |
||
|
保质期(Warranty) |
12 months |
||
|
材质和电镀(Material and plating) |
/ |
||
|
绝缘材质(Housing) |
PA66 |
||
|
螺丝(Screws) |
Steel，Zn plated钢,镀锌 |
||
|
触点材料(Contact) |
Copper alloy，Sn plated铜合金，镀锡 |
||
|
方盒(Cage) |
Copper alloy，Ni plated铜合金，镀镍 |
||
|
接线方法 (Wire connecting) |
|||
|
推荐剥线长度7-8mm; Recommended stripping length 7-8mm; |
|||
|
1.）单股硬导线，剥好对应长度的导线后，用额定的扭力拧紧； For solid wire, stripping wire to the appointed length, then tightening with rated torque. |
|||
|
2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用额定的扭力拧紧； For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque.
|
|||
|
注意事项：扭力要平稳，不能使用爆发力；( Tightening process should be steady, can’t use explosive force.) |
|||