產品展示

變壓器接線端子
型號: TS2.5 series
      
 
  •  
  •  

项   目 (Item)

数   据 (Data)

认证(APPROVAL)

 

测试标准(Test standard)

IEC/EN60998-1:2004 / UL1059

产品间距(Pitch)                                      [mm]

7.5

极数(Poles)

02~03P

EN60998测试数据(EN60998 Test data)  

VDE certificate NO. 40024866

额定电压(Rated voltage)                              [V]

800

额定电流(Rated current)                              [A]

24

额定连接容量(Rated connection capacity)(solid/stranded) [mm2]

0.5~2.5

过压类别/污染等级/绝缘材料组别

(Surge voltage category/pollution degree/material group)

III/2/I

工频耐压(Withstanding Voltage)                     [KV/min]

3.5

额定扭矩(Rated torque)                               [N·m]

0.5

UL1059测试数据(UL1059Test data)

UL File Number E228872

应用组别(Use group)

B

C

D

额定电压(Rated voltage)                              [V]

300

300

/

额定电流(Rated current)                              [A]

10

10

/

额定连接容量(Rated connection capacity) (solid/stranded) [AWG]

24-14

额定扭矩(Rated torque)                            [Lb. in]

4.43

通用数据(General data)

/

螺丝(Screw)

M3

阻燃等级(Inflammability class)UL94

V-0

环境温度(Ambient temperature)                        [℃]

-40~+105

相对湿度(Relative humidity)

5%-95%

抽样检验标准(Inspection standard)

MIL-STD-105E II

允收水准(AQL)

0.65

保质期(Warranty)

12 months

材质和电镀(Material and plating)

/

绝缘材质(Housing)

PA66

螺丝(Screws)

Steel,Zn plated钢,镀锌

触点材料(Contact)

Copper alloy,Sn plated铜合金,镀锡

接线方法(Wire connecting)

推荐剥线长度8-10mm; Recommended stripping length 8-10mm;

1.)单股硬导线,剥好对应长度的导线后,用额定的扭力拧紧;

For solid wire, stripping wire to the appointed length, then tightening with rated torque.

2.)多股柔性导线,剥好对应长度的导线后,可以直接连接或者配套使用对应标准规格的冷压端头,用额定的扭力拧紧;

For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque.

 

注意事项:扭力要平稳,不能使用爆发力;(Tightening process should be steady, can’t use explosive force.)