认证(APPROVAL)

    |  

测试标准(Test standard)

IEC60998-1/ UL1059

产品间距(Pitch)                                      [mm]

/

极数(Poles)

01P

IEC60998-1测试数据（IEC60998-1 Test data)  

/

额定电压(Rated voltage)                              [V]

750

额定电流(Rated current)                              [A]

10

额定连接容量(Rated connection capacity)(solid/stranded) [mm²]

0.2~4.0

过压类别/污染等级/绝缘材料组别

(Surge voltage category/pollution degree/material group)

III/2/I

工频耐压(Withstanding Voltage)                     [KV/min]

3.0

额定扭矩(Rated torque)                               [N·m]

0.5

UL1059测试数据（UL1059Test data)

UL File Number E228872

应用组别(Use group)

B

C

D

额定电压(Rated voltage)                              [V]

600

600

/

额定电流(Rated current)                              [A]

10

5

/

额定连接容量(Rated connection capacity) (solid/stranded) [AWG]

30-12

额定扭矩（Rated torque）                            [Lb. in]

4.43

通用数据(General data)

/

螺丝(Screw)

M3

阻燃等级(Inflammability class)UL94

V-0

环境温度(Ambient temperature)                        [℃]

-40~+105

相对湿度(Relative humidity)

5%-95%

抽样检验标准(Inspection standard）

MIL-STD-105E II

允收水准(AQL)

0.65

保质期(Warranty)

12 months

材质和电镀(Material and plating)

/

绝缘材质(Housing)

PA66

螺丝(Screws)

Copper alloy，Ni plated铜合金，镀镍

触点材料(Contact)

Copper alloy，Sn plated铜合金，镀锡

方盒(Cage)

Copper alloy， Ni plated铜合金，镀镍

载流体(Current carrier)

Copper alloy，Sn plated铜合金，镀锡

接线方法(Wire connecting)

推荐剥线长度8~9mm; Recommended stripping length 8~9mm;

1.）单股硬导线，剥好对应长度的导线后，用额定的扭力拧紧；

For solid wire, stripping wire to the appointed length, then tightening with rated torque.

2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用额定的扭力拧紧；

For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque.

注意事项：扭力要平稳，不能使用爆发力；(Tightening process should be steady, can’t use explosive force.)