项 目 (Item) |
数 据 (Data) |
||
认证(APPROVAL) |
cUL VDE |
||
测试标准(Test standard) |
IEC/EN61984:2009 / UL1059 |
||
产品间距(Pitch)[mm] |
5.08 |
||
极数(Poles) |
2-12P |
||
EN61984测试数据(EN61984 Test data) |
/ |
||
额定电压(Rated voltage)[V] |
320 |
||
额定电流(Rated current)[A] |
20 |
||
额定连接容量(Rated connection capacity)(solid/stranded) [mm²] |
2.5 |
||
过压类别/污染等级/绝缘材料组别 (Surge voltage category/pollution degree/material group) |
III/2/I |
||
额定冲击电压(Rated impulse voltage)[KV] |
4.0 |
||
额定扭矩(Rated torque)[N·m] |
0.4 |
||
UL1059测试数据(UL1059Test data) |
UL File Number E228872 |
||
应用组别(Use group) |
B |
C |
D |
额定电压(Rated voltage)[V] |
300 |
/ |
300 |
额定电流(Rated current)[A] |
10 |
/ |
10 |
额定连接容量(Rated connection capacity) (solid/stranded) [AWG] |
28-12 |
||
额定扭矩(Rated torque)[Lb. in] |
3.54 |
||
通用数据(General data) |
/ |
||
螺丝(Screw) |
M2.5 |
||
阻燃等级(Inflammability class)UL94 |
V-0 |
||
环境温度(Ambient temperature)[℃] |
-40~+105 |
||
相对湿度(Relative humidity) |
5%-95% |
||
抽样检验标准(Inspection standard) |
MIL-STD-105E II |
||
允收水准(AQL) |
0.65 |
||
保质期(Warranty) |
12 months |
||
材质和电镀(Material and plating) |
/ |
||
绝缘材质(Housing) |
PA66 |
||
螺丝(Screws) |
Steel,Zn plated钢,镀锌 |
||
触点材料(Contact) |
Copper alloy,Sn plated铜合金,镀锡 |
||
方盒(Cage) |
Copper alloy,Ni plated铜合金,镀镍 |
||
接线方法 (Wire connecting) |
|||
推荐剥线长度7-8mm; Recommended stripping length 7-8mm; |
|||
1.)单股硬导线,剥好对应长度的导线后,用额定的扭力拧紧; For solid wire, stripping wire to the appointed length, then tightening with rated torque. |
|||
2.)多股柔性导线,剥好对应长度的导线后,可以直接连接或者配套使用对应标准规格的冷压端头,用额定的扭力拧紧; For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque. |
|||
注意事项:扭力要平稳,不能使用爆发力;( Tightening process should be steady, can’t use explosive force.) |